12 Fibers MPO Female To SC/APC Breakout Trunk Cable Single mode
8 Fiber MPO fan out cables are most commonly used in converting existing 10G networks to higher performing 40G and 100G speeds. For example, a QSFP+ transceiver may be configured to accept four separate 10G signals from SFP+ transceivers. This method extends the life of established cabling infrastructure, reduces overall cost, and maintains setup time to an absolute minimum.
Features
◆ Allow easy migration from 10G to 40G and 100G
◆ Female MPO connector(without guide PIN) and Male MPO connector(with guide PIN) available
◆ Standard and Elite version MT ferrule available
◆ Different color connectors available; Push-and-Pull tab MPO connector available
◆ Comply with TIAFOCIS5/604-5, Bellcore GR-1435
Application
◆ Active device termination
◆ Fiber optic data transmission
◆ Data communication network
◆ MPO cassettes, racks
◆ Test equipment
Specification
1. Operating & Storage Temperature
| | Parameters | Min | Max | Unit |
| 1 | Operating Temperature | -40 | 70 | °C |
| 2 | Storage Temperature | -40 | 70 | °C |
2. Optical Performance
| Parameter | Unit | SM Standard Loss | SM Low Loss | MM Standard Loss | MM Low Loss |
| Insertion Loss | Typical | dB | 0.35 | 0.2 | 0.35 | 0.2 |
| Max | 0.75 | 0.35 | 0.65 | 0.35 |
| Return Loss | dB | APC≥50 | / | ≥25 | ≥35 |
| PC≥40 |
| Repeatability | dB | ≤0.1 |
| Interchangebility | dB | ≤0.3 |
| Durability | dB | ≤0.3(change 500 matings) | ≤0.3(change 1000 matings) |
| Vibration | dB | ≤0.3 |
| Operating Temperature | ℃ | -25-+70 |
| LC/FC/SC Connector |
| Item | SM | MM |
| | 1310nm/1550nm IL(dB) | 1310nm/1550nm RL(dB) | 850nm IL(dB) | 850nm RL(dB) |
| PC | <=0.2 | >=50 | <=0.3 | >=25 |
| APC | <=0.3 | >=60 | N/A | N/A |
3. Geometry Parameters
| MT |
| Measurement | Pass/Fail Limits |
| Parameters | Min | Max |
| | | |
| Radius of Curvature | Long Axel | 2000mm | ∞ |
| Short Axel | 50mm | ∞ |
| Angle | Long Axel | -0.2° | 0.2° |
| Short Axel | APC | 7.8° | 8.2° |
| PC | -0.2° | 0.2° |
| Fiber Height | 1000nm | 3000nm |
| Different Fiber Height | N/A | 500nm |
| Adjacent Fiber Height | N/A | 300nm |
| Ferrule Length | 7.9mm | N/A |
| FC/LC/SC UPC |
| Item | Pass/Fail |
| Parameters | Min | Max |
| FC ROC | 10.00mm | 25.00mm |
| LC ROC | 7.00mm | 25.00mm |
| Fiber Height | -100.00nm | 50.00nm |
| Apex Offset | 0.00μm | 50.00μm |
| FC/SC/LC APC |
| Item | Pass/Fail |
| Parameters | Min | Max |
| ROC | 5.0mm | 12.00mm |
| Fiber Height | -100.0nm | 50.0nm |
| Apex Offset | 0.00μm | 50.00μm |
| APC Angle | 7.700deg | 8.300deg |
| Key Error | -0.500deg | 0.500deg |
Product Advantages
◆ We passed many quality system vertification, like ISO, RoHS; and passed the Supplier Audition of the key account.
◆ We have a high production capacity. Standard patch cord capacity is 15,000 connectors/day and MT product capacity is 3000 connectors/day.
◆ Our testing standard is much rigorous. Every cable is tested individually in our production line as well as 100% tested by the QC department.
◆ Our service is qualified. We insist on responsive and knowledgeable service to each customer.
ORC QC Process Flow Chat
FAQ
1. Q: How can you test a single mode jumper?
A: Our single mode patch cables have been tested for end-face inspection, singlemode IL and RL testing.
2. Q: Are these cables compatible with a variety of modules?
A: Yes, LC cables can be compatible with SFP, SFP+(BIDI SFP+), XFP, SC cables can be compatible with BIDI SFP, GBIC, X2 and XENPAK.
3. Q: What's your average lead time?
A: Our lead time is controlled within 5 working days for the regular products. For the MT products, our capacity is 3000 connectors per day.
4. Q: Can you produce according to the samples we send you?
A: Of course, we can produce according to your samples or technical drawings.
